This article introduces two power amplifier circuits TD1514A designed by Philips for digital audio as the two-channel power amplifier circuit of this Hi-Fi combination (as shown in the figure below, the other channel in the figure is omitted, the other channel is The figure shows the TDA1514A's output power is large: Pout = 50W (VP = ± 27.5V), high conversion speed: 15V / μs, excellent signal-to-noise ratio of 85dB, ripple rejection of 75dB, THD - 0.08%, TDA1514A operating voltage: ±9-±30V, TDA1514A circuit has standby and squelch state, with overheat protection, short circuit protection, power tube safe working area protection and electrostatic discharge protection. Low offset voltage, high ripple rejection, and very low thermal resistance.
This article refers to the address: http://
As we all know, many power amplifiers have a power of about 100W × 2, but in the home, the volume is usually only about 1/5 - 1/4, that is, only about 10-30W, and it is necessary to open the ears. Suffering from sin, the thorns can not stand and will make the music distorted, so the general tens of square meters of families have "golden power" about 30W audio equipment is most suitable.
Application circuit diagram 5 characteristics of the circuit: the use of constant current negative feedback and DC servo system (DC servo circuit main circuit is used to accurately correct the TDA1514A circuit after canceling the negative feedback of the ground blocking capacitor, the output DC potential drift). The current sample flowing through the speaker voice coil is fed back to the amplifier input by the linear element resistance RA (0.5 Ω 2W), so that the amplifier drives the load in a fixed current mode, and the speaker is oscillated by the current control to sound. The characteristic is that when the playback frequency is near the low frequency and the resonance peak, the constant current circuit enhances the strength of the bass and the resolving power of the high sound, so that the playback sound of the whole system sounds full, thick and clear, and has the charm of the tube amp. .
Description of Antenk's Slim D-Sub Connector
D-Sub Connector Slim is a space-saving D-sub Socket Connector with an 8.54mm depth. The slim 8.54mm depth reduces the board mounting area by 33% as compared with standard models. The Slim Profile D-Sub Connectoroffering includes D-sub sockets with nine right-angle DIP terminals and a mounting board thickness of either 1.6 mm or 1.0 mm (from difference in lock pin structure). RoHS compliant, Slim D-Sub Connector offers a 3A rated current, 300VAC rated voltage, and an insertion durability of 100 times within an operating temperature range of -25º to 105ºC.
Features of Antenk's Slim D-Sub Connector
Board mounting area is reduced by 33% (compared with standard models) using a depth of 8.4mm
D-sub sockets with nine right-angle DIP terminals
Mounting board thickness of either 1.6mm or 1.0mm (from difference in lock pin structure)
RoHS Compliant
Applications of Antenk's Slim D-Sub Connector
Factory Automation
Machine Tools
Power SuppliesMedical Tools
Test & Measurement
LSI/FPD Manufacturing Systems
Information Transmission Tools
Security Tools
Industrial Tools
Slim D SUB Connector,High Density D-Sub Connector Slim, Solder type D-Sub Connector Slim,Right Angle D SUB Connector Slim, slim profile 90°- SMT D SUB Connector,9 15 25pin slim profile 90°- THT D SUB Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com