5.8GHz remote station construction scheme
1. Description of Remote Station
The remote station (RU) communicates with the central base station (AP) wirelessly, and connects to the local LAN through the 100 / 10Base-T Ethernet interface. Each user can share bandwidth with other users via an Ethernet switch or router to improve the efficiency of the entire network. At the same time, it is easier to deploy in the network.
1. The remote site (CPE) equipment includes: outdoor RF units that provide RF functions and can send and receive wireless signals, indoor units that provide Ethernet power, routers and switches used to connect users of different networks, UPS power supply, parabolic directional antenna RF cable and SSTP twisted pair.
2. The outdoor unit (ODU) adopts waterproof design, which can adapt to the outdoor temperature change of -30 ℃ ~ 60 ℃.
3. The indoor unit (IDU) is an Ethernet power supply, including a data interface and a power module.
The structure of the remote station (CPE) is shown below
Figure SWR5000 remote station structure
Second, the device configuration
The standard configuration of a remote station (CPE) includes: outdoor unit, indoor unit, Ethernet switch, UPS power supply, SSTP twisted pair and parabolic directional antenna.
The standard configuration products included in the cabinet of each remote station equipment are:
1. Outdoor radio frequency unit (ODU), 1 set;
2. Indoor power supply unit (IDU), 1 set;
3. Ethernet switch, 1 set;
4. UPS power supply, 1 set;
5. Parabolic directional antenna, 1 pay;
6. RF cable, 1;
7, SSTP twisted pair, 1;
8. 1 set of equipment quick installation and user manual.
3. Equipment configuration list
The remote station (CPE) configuration list is as follows:
5.8GHz Remote Station (CPE) equipment configuration list
Serial number | Device Description | Quantity | unit | Remarks |
1 | Outdoor RF unit | 1 | station | SWR 5800 RU (ODU) |
2 | Indoor power supply unit | 1 | station | SWR 5800 RU (IDU) |
3 | Ethernet switch | 1 | station | |
4 | SSTP twisted pair (50m) | 1 | root | RJ-45 at both ends of the connector |
5 | RF cable (1.5m) | 1 | root | 50Ω, N-50J at both ends of the connector |
6 | 5.8 GHz parabolic directional antenna | 1 | pay | |
7 | UPS power supply | 1 | station | |
8 | Other integrated materials | 1 | set | Including waterproof kit, pole, etc. |
Optional equipment:
Broadband access router.
4. Description
The number of remote station (CPE) equipment varies according to the number of users in each sector, and each remote station (CPE) corresponding to each sector of each central base station (HE) deploys at least one set of equipment.
P30 Bone Conduction Earphone,P30 Bone Conduction Headset,Sweat Proof Bone Conduction Headphones,Innovation Bone Conduction Headset
Shenzhen Lonfine Innovation Technology Co., Ltd , https://www.lonfinesmart.com