500kv Steel Transmission Line Power Tower (LT-001)

  • Model NO.: LTTLT-001
  • Conductor Circuit: Double Circuit
  • Materials: Steel
  • Style: Cable Tower
  • Height: :30meters
  • Raw Material: Q235B Q345b Q460c
  • Trademark: LT
  • Origin: Qingdao Shandong China
  • Usage: Crossing Tower, Tension Tower, Angle Tower, Terminal Tower
  • Certification: ISO
  • Standard: Standard
  • Structure: B Type
  • Voltage Grage: 500kv
  • Surface Treatment: Hot DIP Galvanized
  • Specification: ISO
  • HS Code: 73089000

500kv Steel Transmission Line Power Tower (LT-001)
500kv Steel Transmission Line Power Tower (LT-001)
Section 1
Production Informations:
Raw Marerial :(GB)Q235B     ASTM A36       (JIS)SS400B          (EN) S235JR
(GB)Q345B    ASTM A 572  SM409B    (EN)S335JR
Voltage Grade:220KV
Height:35M
Surface Treatment:Hot Dip Galvanized.
Zince Coating Thickness:≥86microns(μm).



Section 2
Lutai is an expert  manufacturer  for all types of steel towers.We have a independent Design Center.

Design and Manufacture scope:
1) Material:All types,GB/ASTM/JIS/EN.
2) Yield strength:235 MPA-460MPA
3) Voltage Grade:10-1000KV
4)Type of Conductor: vertical,triangle,horizontal.
5) Wind velocity:23.5m/s-35m/s.
6) Span:Below 1000m.
7) Height:5-80M
8) Surface Treatment:Hot dip galvanized,Painting,spray-paint.
9) Coating Thickness:According to your requirement.




The Copper cable Terminals are suitable for the connection of copper conductors (section 1.5mm2 - 1000mm2) in power cable with electronic equiment they are made of with higher 99.9 percent pure copper tube T2 and coated with tin. Working temperature:-55℃ - 150℃ .The Copper Cable Terminal Lug is a connecting terminal for electric power transmission and connection, which comprises an aluminum terminal body, one end of the terminal body is in the shape of a circular tube and the other end is a flat plate, on one surface of the flat body part of the terminal body is provided with a copper plate Layer, the copper layer and the corresponding plate portion is in close contact with the fusible connection into an integrated non-fiber structure. The terminal of the utility model is integrally welded and connected with the copper sheet layer on the integral aluminum terminal body, the connection is reliable and does not fall off, the integral strength of the terminal body is high and does not collide and break; the non- Low current loss, improve transmission efficiency and voltage transformers pressure, and the production of only a small amount of copper, drastically reducing the copper consumption and reduce costs


Compression Type Connecting Terminal

Copper Cable Terminal

Copper Cable Terminal,Copper Cable Terminal Lug,Cable Connector Terminal Lug,Copper Tube Terminal Lug

Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com