Standard:
IEC60502, and BS6346, VDE, AS/NZS, UL, etc or as customer's request.
The Rated Voltage(kv):
1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35 2ND class 1/1 3/3 6/6 8.7/10 12/15 18/20 - 26/35
Application:
These cables are most suitable for direct burial or for installation on trays or ducts, Where there is a risk of mechanical damage, armoured cables should be used.
Construction: (Example of YJV32 8.7/15kV)
Copper(aluminum)conductor or conductor screen
XLPE insulation or insulation screen
Color for core identification
Assembly/bedding/armoured/outer sheath.
Number of cores:
1core 2core 3core 3+1core 4core 4+1core 4+2core 5core and so on.
Nominal Section Area(mm2): 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800
Note: We can provide more info than above data, if needed. The above are just some examples
The specifications, cross sections and sizes not list in aboved table can be design and produce according to your demands
|
Type |
Description |
Application n |
|
|
Cu |
Al |
||
|
YJV |
YJLV |
XLPE insulation PVC sheath power cable |
To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside |
|
YJY |
YJLY |
XLPE insulation PE sheath power cable |
|
|
YJV22 |
YJLV22 |
XLPE insulation, steel tape armor, PVC sheath power cable |
To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force. |
|
YJV23 |
YJLV23 |
XLPE insulation, steel tape armor, PE sheath power cable |
|
|
YJV62 |
YJLV62 |
XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable |
|
|
YJV32 |
YJLV32 |
XLPE insulation, thin steel-wire armor, PVC sheath power cable |
Be applicable to the well, water inside and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint . |
|
YJV72 |
YJLV72 |
XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable |
|
|
YJV42 |
YJLV42 |
XLPE insulation, thick steel-wire armor, PVC sheath power cable |
Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint. |
 |
1st class |
0.6/1kv |
1.8/3kv |
3.6/6kv |
6/10kv |
8.7/15kv |
12/20kv |
18/30kv |
21/35kv |
|||
|
2nd class |
1/1kv |
3/3kv |
6/6kv |
8.7/10kv |
12/15kv |
18/20kv |
- |
26/35kv |
||||
|
1 Core |
Section area(mm2) |
1.5-800 |
25-800 |
25-800 |
25-800 |
35-800 |
50-800 |
50-800 |
50-800 |
|||
|
2 Core |
Section Area(mm2) |
1.5-185 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|||
|
3 Core |
Section area(mm2) |
1.5-400 |
25-400 |
25-400 |
25-400 |
35-400 |
50-400 |
50-400 |
50-400 |
|||
|
4 Core |
Section Area(mm2) |
2.5-400 |
25-400 |
/ |
/ |
/ |
/ |
/ |
/ |
|||
|
5 Core |
Section area(mm2) |
2.5-400 |
25-400 |
/ |
/ |
/ |
/ |
/ |
/ |
Standard:
IEC60502, and BS6346, VDE, AS/NZS, UL, etc or as customer's request.
The Rated Voltage(kv):
1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35 2ND class 1/1 3/3 6/6 8.7/10 12/15 18/20 - 26/35
Application:
These cables are most suitable for direct burial or for installation on trays or ducts, Where there is a risk of mechanical damage, armoured cables should be used.
Construction: (Example of YJV32 8.7/15kV)
Copper(aluminum)conductor or conductor screen
XLPE insulation or insulation screen
Color for core identification
Assembly/bedding/armoured/outer sheath.
Number of cores:
1core 2core 3core 3+1core 4core 4+1core 4+2core 5core and so on.
Nominal Section Area(mm2): 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800
Note: We can provide more info than above data, if needed. The above are just some examples
The specifications, cross sections and sizes not list in aboved table can be design and produce according to your demands
|
Type |
Description |
Application n |
|
|
Cu |
Al |
||
|
YJV |
YJLV |
XLPE insulation PVC sheath power cable |
To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside |
|
YJY |
YJLY |
XLPE insulation PE sheath power cable |
|
|
YJV22 |
YJLV22 |
XLPE insulation, steel tape armor, PVC sheath power cable |
To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force. |
|
YJV23 |
YJLV23 |
XLPE insulation, steel tape armor, PE sheath power cable |
|
|
YJV62 |
YJLV62 |
XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable |
|
|
YJV32 |
YJLV32 |
XLPE insulation, thin steel-wire armor, PVC sheath power cable |
Be applicable to the well, water inside and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint . |
|
YJV72 |
YJLV72 |
XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable |
|
|
YJV42 |
YJLV42 |
XLPE insulation, thick steel-wire armor, PVC sheath power cable |
Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint. |
 |
1st class |
0.6/1kv |
1.8/3kv |
3.6/6kv |
6/10kv |
8.7/15kv |
12/20kv |
18/30kv |
21/35kv |
|||
|
2nd class |
1/1kv |
3/3kv |
6/6kv |
8.7/10kv |
12/15kv |
18/20kv |
- |
26/35kv |
||||
|
1 Core |
Section area(mm2) |
1.5-800 |
25-800 |
25-800 |
25-800 |
35-800 |
50-800 |
50-800 |
50-800 |
|||
|
2 Core |
Section Area(mm2) |
1.5-185 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|||
|
3 Core |
Section area(mm2) |
1.5-400 |
25-400 |
25-400 |
25-400 |
35-400 |
50-400 |
50-400 |
50-400 |
|||
|
4 Core |
Section Area(mm2) |
2.5-400 |
25-400 |
/ |
/ |
/ |
/ |
/ |
/ |
|||
|
5 Core |
Section area(mm2) |
2.5-400 |
25-400 |
/ |
/ |
/ |
/ |
/ |
/ |
The small appearance and size of the One Hand Gaming Keyboard is one of the key points for users to choose.The maximum length of the keyboard in one-handed games is usually only half or even less than one third of the standard keyboard.The most comfortable position for both hands is usually slightly larger than the shoulder width of the player (the distance between the tail fingers of both hands is about 500-650mm).When using the standard keyboard, between the mouse and the keyboard. The clearance for Gaming Mouse movement is usually no more than 100mm(standard 104-key keyboard length is about 450mm). And the use of one-handed game keyboard, can let the player play with a wide mouse movement space, so that players enjoy a more rapid and flexible mouse operation.
Due to the limited size of one-handed gaming keyboards, the number of surface keys usually does not exceed the number of keys in the main key area of a standard keyboard (61 keys). Although the current PC games are designed with the first left hand key area, some secondary keys are still designed in the right hand key area for the convenience of players' memory and game operation.
For the one-handed game keyboard, comfortable ergonomic design, is to allow players to maintain long-term combat effectiveness of the basic guarantee. However, it is different from the ergonomic design of mouse in that players often move their fingers up and down and left and right when using the Gaming Keyboard.The ergonomic design that is too close to the palm will lead to the restriction of finger movement. Therefore, the ergonomic design of the one-handed game keyboard must be carried out in order to ensure that the player's finger operation is not affected.
One Hand Gaming Keyboard,Computer Gaming Keyboard,Wireless One Handed Keyboard,Single Hand Gaming Keyboard
Henan Yijiao Trading Co., Ltd , https://www.yjusbhubs.com