50hz, this is the lowest frequency band we use. This band is the most important frequency band for the strong drum sound you hear outside the hall. It is also the frequency that people can dance for. By properly upgrading it, you will get an exciting drum sound. However, be sure to cut off all the 50hz sounds in the human voice, because it must be the sound of the sprayed wheat.
70 ~ 100hz, this is the necessary frequency for us to get a strong and powerful BASS, at the same time, it is also the frequency of the need to cut the human voice. Remember, the BASS and the drum should not raise the same frequency, otherwise the drum will be masked.
200 ~ 400hz, this frequency band has the following main purposes, the first is the wooden sound frequency band of the snare drum; secondly, this is the frequency band that eliminates the sensation of murmur; third, for the guitar, raising this frequency band will make the sound change The warmth; fourth, for 镲 and PERCUSSION, attenuating this band can increase their crispness. Among them, at the frequency of 250hz, the proper gain to the ground drum can make the ground drum sound less heavy, and it is used in many popular pop music.
400 ~ 800hz, adjust this band, you can get a clearer BASS, and can make the drum more warm. In addition, the thickness of the guitar sound can be adjusted by gaining or attenuating certain frequencies in this band.
800 ~ 1khz, this band can be used to adjust the "sturdy" degree of vocals, or to enhance the knocking sensation of the drum, more suitable for the drums of dance music.
1k ~ 3khz, this band is a "hard" frequency band. Among them, the 1.5k~2.5k boost can increase the "sharp" feeling of guitar or BASS; the slight attenuation in 2~3k will make the vocals smoother and smoother. Otherwise, some people's voices will sound like singing. Like a fight, you can use this process to calm the singer's anger! Conversely, upgrading in this band will also increase the sharpness of the vocals or the piano. Ha ha. In general, this band is often used as a noise band. Too much will make the whole music clutter, but proper use on a certain instrument will make the instrument stand out.
3k ~ 6khz, when the sound is 3k, it is still hard, then, without me, everyone knows what to do. As for 6k, raising this frequency can improve the clarity of the vocals, or make the guitar sound more gorgeous.
6k ~ 10khz, this band can increase the "sweet" feeling of the sound. And increase the sense of air and breathing. And can increase the crisp sound of the guitar (but be careful not to overuse). PERCUSSION, snare drums and big cymbals can all beautify the sound in this band. And, strings and some synthesizers combine sounds, and you can get the "blade" of the sound in this band (I really don't know how to describe such a sound).
10k ~ 16khz, raising this band will make the voice more gorgeous, and can enhance the most pointed part of the big and PERCUSSION. However, it is important to note that you must first confirm that there is sound in this band. Otherwise, what you add is definitely noise.
Summary of EQ: Many sound engineers believe that the role of EQ is to attenuate rather than improve, but not necessarily. Of course, if the quality of your equalizer is too bad, then there is no way. In addition, the effect of different equalizers is not the same. Don't think that you can get a satisfactory sound on this equalizer, then you can also use it on other equalizers. This is the wrong concept. As for the cause of this result, you may have to ask the manufacturer of the equalizer.
Vecsel Experimental System,Chip Testing System Certification,Chip Testing System Chart ,Chip Test Requirements
AcePhotonics Co.,Ltd. , https://www.cgphotonics.com