Do you know how Unicom IPTV should be set up? Many users are in no position to face this problem. They should not know how to set it up. Don't worry, today we have provided Unicom's IPTV network TV set-top box setup tutorial. First, the connection setup overall steps
1. The ONU LAN2 of the optical cat is connected to the WAN of the TV special router. At the same time, the optical LAN1 port stops using and no longer connects to the computer or the router. WoTV special routers can be connected to set-top boxes and computer terminals through four network ports. The network ports on the routers can be used in any order. Four network ports are free to use. The router also has WIFI functions.
2. Configure the router's Internet access VLAN and Internet access account/password.
3. Configure IPTV account/password.
4, configure "Internet HD" account / password.
Second, configure the route to the Internet VLAN and Internet access account / password
1. Enter 192.168.3.1 in the IE browser to enter the router's management page. The username is tjunicom-admin, and the password is admin-tjunicom (or use the username/password attached to the router).
2. Go to Basic Configuration - WAN, select PPPoE connection, enter the VLAN value (the VLAN value can be found on the installation master's work order), and the broadband Internet access account/password, click "Submit" to save.
The choice of VLAN value:
1. For Huawei ONU, enter 20 in the VLAN value.
2. For non-Huawei ONUs, enter the "Internet Service Intra-VLAN ID" information in the "Outside Work Order" for the VLAN value.
Third, configure IPTV account / password
1, STB boot into the main page, select the bottom of the screen "settings" or click IPTV for the first time, enter the IPTV settings interface.
2. Enter IPTV Settings, enter the password 8288, and click OK.
3. Enter the assigned IPTV "account number" and "password". The account number is broadband 11-bit code +2 (standard definition) or 3 (high definition), the code is, and then click "OK".
4. The page display setting is successful.
Fourth, configure "Internet HD" account / password
1, STB boot into the main page, select to enter the right "Internet HD."
2. Enter the "Internet HD" username and password, and click "Confirm". The user account is the IPTV account, ie, the broadband 11-bit encoding is +2 (SD) or 3 (HD), and the user password is. If the username and password are correct, you can enter the Internet HD homepage interface.
Fifth, wireless connection
1. China Unicom Optical Fiber Co., Ltd. is connected to a fiber cat on ZTE.
2. The fiber-optic LAN1 port is connected to a TP-Link wireless router. ADSL dial-up, the home's wireless devices originally used the wireless router to access the Internet.
3. The LAN4 port of the fiber-optic cat is a specially reserved iptv port. Its settings are different from those of the other three LAN ports. A wireless router (here called Routing B) is connected from the LAN 4 port for the wireless connection of the iptv set-top box. Be sure to connect to the LAN port of route B instead of the WAN port.
4. The USB port of the set-top box is plugged into the USB wireless network card and the connection route B.
Precautions
1, must buy the same chip USB wireless network card. Known for compatibility are TENDA W311U+ and B-LINK BL-LW05-A.
2, the set-top box password is 6321, the password may be different.
3, first set up route B.
1) Set to AP mode, and some routers are called "dynamic IP mode".
2) DHCP is off.
3) Be sure to select WPA-PSK or WPA2-PSK encryption. Other encryption methods include no password, and the set-top box cannot be connected.
4, enter the set-top box settings, select "Network Settings", select "wireless" settings, search for wireless networks, if the network card is compatible, other settings are no problem, should be able to find route B, use the soft keyboard to enter the password.
5. The STB wirelessly selects the DHCP mode.
6. After the setting is completed, enter the password and save it to restart.
1. The ONU LAN2 of the optical cat is connected to the WAN of the TV special router. At the same time, the optical LAN1 port stops using and no longer connects to the computer or the router. WoTV special routers can be connected to set-top boxes and computer terminals through four network ports. The network ports on the routers can be used in any order. Four network ports are free to use. The router also has WIFI functions.
2. Configure the router's Internet access VLAN and Internet access account/password.
3. Configure IPTV account/password.
4, configure "Internet HD" account / password.
Second, configure the route to the Internet VLAN and Internet access account / password
1. Enter 192.168.3.1 in the IE browser to enter the router's management page. The username is tjunicom-admin, and the password is admin-tjunicom (or use the username/password attached to the router).
2. Go to Basic Configuration - WAN, select PPPoE connection, enter the VLAN value (the VLAN value can be found on the installation master's work order), and the broadband Internet access account/password, click "Submit" to save.
The choice of VLAN value:
1. For Huawei ONU, enter 20 in the VLAN value.
2. For non-Huawei ONUs, enter the "Internet Service Intra-VLAN ID" information in the "Outside Work Order" for the VLAN value.
Third, configure IPTV account / password
1, STB boot into the main page, select the bottom of the screen "settings" or click IPTV for the first time, enter the IPTV settings interface.
2. Enter IPTV Settings, enter the password 8288, and click OK.
3. Enter the assigned IPTV "account number" and "password". The account number is broadband 11-bit code +2 (standard definition) or 3 (high definition), the code is, and then click "OK".
4. The page display setting is successful.
Fourth, configure "Internet HD" account / password
1, STB boot into the main page, select to enter the right "Internet HD."
2. Enter the "Internet HD" username and password, and click "Confirm". The user account is the IPTV account, ie, the broadband 11-bit encoding is +2 (SD) or 3 (HD), and the user password is. If the username and password are correct, you can enter the Internet HD homepage interface.
Fifth, wireless connection
1. China Unicom Optical Fiber Co., Ltd. is connected to a fiber cat on ZTE.
2. The fiber-optic LAN1 port is connected to a TP-Link wireless router. ADSL dial-up, the home's wireless devices originally used the wireless router to access the Internet.
3. The LAN4 port of the fiber-optic cat is a specially reserved iptv port. Its settings are different from those of the other three LAN ports. A wireless router (here called Routing B) is connected from the LAN 4 port for the wireless connection of the iptv set-top box. Be sure to connect to the LAN port of route B instead of the WAN port.
4. The USB port of the set-top box is plugged into the USB wireless network card and the connection route B.
Precautions
1, must buy the same chip USB wireless network card. Known for compatibility are TENDA W311U+ and B-LINK BL-LW05-A.
2, the set-top box password is 6321, the password may be different.
3, first set up route B.
1) Set to AP mode, and some routers are called "dynamic IP mode".
2) DHCP is off.
3) Be sure to select WPA-PSK or WPA2-PSK encryption. Other encryption methods include no password, and the set-top box cannot be connected.
4, enter the set-top box settings, select "Network Settings", select "wireless" settings, search for wireless networks, if the network card is compatible, other settings are no problem, should be able to find route B, use the soft keyboard to enter the password.
5. The STB wirelessly selects the DHCP mode.
6. After the setting is completed, enter the password and save it to restart.