However, for the elderly, the remote control of smart devices is tedious, and older people still use traditional remote controls to operate. However, in daily life, a slight misuse can cause the malfunction of the traditional remote control. What should we do if we encounter this situation?
Remote control failure check and solution:
1. Whether the remote control distance is correct: The distance from the front of the remote control is within 8 meters, and no obstacles are blocked in front of the TV.
2. Remote control angle: With the TV remote control window as the vertex, the left and right direction of the controlled angle is not less than plus or minus 30 degrees, and the vertical direction is not less than plus or minus 15 degrees.
3, if the remote control is not normal, unstable or can not control the TV, please replace the battery.
4. If it is still unresolved, consider replacing the remote control.
Daily maintenance and maintenance of remote control:
1. The batteries should always be replaced in pairs. The old pair of batteries must be replaced with a pair of new batteries.
2. Do not mix old and new batteries.
3, do not mix different types of batteries, such as: the "carbonate" battery and "alkaline" battery mix.
4. Do not charge, short-circuit, disassemble, heat, or incinerate used batteries.
5. It is necessary to replace the battery only when the remote controller is operating in a good or bad condition or when the television cannot be controlled.
6. If the remote controller is not used for a long time or the battery is exhausted, remove the battery to prevent the battery leakage from corroding the remote controller.
The battery of the remote controller is correctly installed:
1. The remote controller uses two No. 7 batteries.
2. Install the battery as shown in the instruction sheet, and make sure that the positive and negative batteries are installed correctly.
3, do not mix old and new batteries. If you do not use the remote control for a long time, remove the battery.
4. Dispose of used batteries properly so that children do not touch them.
The above is about the daily use and maintenance of the remote control. Correct use and frequent maintenance can effectively extend the service life of the remote control and provide users with a smooth user experience.
2inch Bluetooth Dot Matrix Printer is a Portable Dot Matrix Printer. Our Dot Matrix Printer equipped with Epson printer head, support long lifetime printing. Qunsuo are Dot Matrix Printer Bluetooth manufacturer in China. Due to its handy style, it is a handheld dot matrix printer, support printing 2 page copy paper.
Qunsuo will provide customer SDK for free, support any technical issues.
2inch Bluetooth Dot Matrix Printer
Printer Dot Matrix Bluetooth,Printer Bluetooth Dot Matrix,Dot Matrix Printer Bluetooth,Dot Matrix Printer Handheld
Shenzhen Qunsuo Technology Co., Ltd , https://www.qsprinter.com