Q: I want to configure an Ethernet, use a switch, a host computer with an Ethernet card, a CPU319, a CPU315, dcs system can access the data of the host computer, how to set the network parameters?
A: First of all, be clear about the type and number of network devices you have used. For example, the model and number of switches.
Second, according to the network load, VLAN, Route, etc. are reasonably divided, and the purpose of optimizing the network has been achieved.
The network devices you use here are the host computer with Ethernet card, two plc, DCS system and industrial switch. What model is used by your Siemens switch? If you are not using SCALANCEX300 or X400, then the IP address you set will use the same network segment. For example, CPU319 is 192.168.1.10; CPU315 is 192.168.1.11; DCS is 192.168.1.12; upper computer is 192.168.1.13;
Choosing A, B, and C IP addresses based on the number of devices is the easiest and less error-prone. Then you can plan your IP address. Set to the CP and SCALANCE industrial switches according to the planned IP address. If you use the SCALANCEX300 or X400, the situation is very different. The network can be built and optimized based on the characteristics of the switch.
With more than 15+ yrs rich MFG experience, you can definitely trust in and cooperate with.
Provide you with the supply of Personal Protective Equipment. to help you safely get back to your daily routine.
Our products include pulse Oximeter Finger, Forehead Thermometer, Automatic foam soap dispenser, etc.
Our strict quality control protocol thoroughly vets every aspect of production, storage, and shipments all the way way to our end customers.
infrared thermometers wholesale, forehead thermometer wholesale,wholesale thermometer suppliers
TOPNOTCH INTERNATIONAL GROUP LIMITED , https://www.itopnoobluetooth.com